$1,995.65 NZD

KRANZLE PROFI 160TST Pressure Cleaner

WB- ModelKP160TST
WB-Operating Psi/Bar1960/140
WB-Total StopYes
WB-Water TankYes
WB-Hose15m Drum
WB-Detergent InjectorHigh Pressure
WB-Dimensions335 x 375 x 980
WB-Weight KG41

High Pressure Cleaner

Operating pressure 140 bar/2100 psi fully adjustable

4000 epsi equivalent pressure with the DirtKiller

D/K Nozzle 25045

Special Knife jet nozzle 042

Water flow 11 Ltrs/Min. @ 1400 rpm

Removable water tank for increased performance but easy converstion to suction mode.

Max inlet water temp 60oc

Max height for direct suction 2.5 m

Built in bigger hose reel with 15 m rubber coated steel braided high pressure hose.

High pressure chemical/detergent system with no loss of power.

Automatic stop start.

5m power cable.

Storage locations for gun & lances

The integrated water tank not only protects the pump from inadequate water supplies but increases the usable pressure at the lance by approximately 30% with the added feature of high pressure detergent facility The tank can be removed in seconds without the need of any tools so that you can connect a suction hose direct to the pump to draw water from up to 2.5 metres depth from a water butt, tank, swimming pool
A major advantage to the new generation of pressure washer from Kranzle is that you can clean with detergents and degreasers at high pressure. This is a big help when cleaning engine compartments, gearboxes or doing pre MOT cleaning on HGVs. It also increases the effectiveness of cleaning where hygiene and BIO-SECURITY is essential such as on farms, in areas with livestock, kennels or any food handling areas.
When you open the detergent valve on a Profi the detergent is drawn in with the water by the pump and sprayed at high pressure. This means no loss of performance and no need for an injector.
With the Profi the pressure you see on the gauge is the pressure you get at the lance.

The water tank on a Profi also protects the pump from being starved of water. On a conventional pressure washer attached to a tap via a hose if there is not enough water flow to the pump the pistons inside are held forward by the vacuum that forms on the inlet. This causes knocking in the transmission and serious damage to the pump if not rectified. The water tank on the Profi acts as a buffer between the water mains and the pump and compensates for fluctuations in the supply - protecting the pump.

Two very good reasons why the Kranzle Profi and Quadro machines are the right choice for someone who wants the best.


KranzleBroch2010.pdf KranzleBroch2010.pdf
File Size: 2545kb
File Size: 261kb